Board foot and lumber calculator
Add up a cut list in board feet or cubic metres, with the running length and the cost, before you go to the yard.
Your cut list
Volume of each line is thickness × width × length × quantity, in the sawn sizes the yard sells by.
Pieces
Enter the size the yard sells by, for example 45 × 95 mm. Decimal lengths such as 4.8 m work.
Order and price
Added to each line and rounded up to whole pieces. Leave at 0 if your list already has spares.
Optional. Use the yard's price in any currency.
Add this calculator to your website
Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.
طريقة الاستخدام
- 01Write each size on its own line: thickness, width, length and how many pieces.
- 02In imperial units enter nominal sizes, such as 2 × 6 or 5/4 × 8, with lengths in feet. In metric enter the sawn size in millimetres and the length in metres.
- 03Add a share for waste if your list has no spares, and the yard's price per board foot, cubic metre, length or piece.
- 04Copy or print the list and take it to the yard.
طريقة الحساب
A board foot is a piece of wood 12 in wide, 12 in long and 1 in thick: 144 cubic inches. Yards price wood in different ways: per board foot, per cubic metre, per length or per piece. The calculator gives all of them for the same list.
- Board feet per piece
- thickness (in) × width (in) × length (ft) / 12
- Cubic metres per piece
- thickness (m) × width (m) × length (m)
- Pieces with waste
- quantity × (1 + waste), rounded up per line
- Cost
- board feet, m³, length or pieces to buy × price
Board feet are figured on nominal sizes. A 2 × 6 is really about 1 1/2 × 5 1/2 in, so its true volume is smaller, but the yard prices the nominal volume. Rough hardwood is sold in quarters of an inch, and the board foot uses the rough thickness even when you buy it planed.
One board foot is 0.00236 m³, so a cubic metre is about 424 board feet.
مثال محلول
Ten 8 ft 2 × 4 and three 12 ft 2 × 6
- 2 × 4 × 8 / 12 = 5.33 board feet each, 53.3 for ten.
- 2 × 6 × 12 / 12 = 12 board feet each, 36 for three.
- Total: 89.3 board feet, 116 ft of running length.
- From the UW–Madison fact sheet: a 10 ft 2 × 6 is 10 board feet, and a stack 36 in high, 60 in wide with 8 ft boards holds 1,440.
نصائح لطلب الكمية المناسبة
Ask how the yard prices
The same 2 × 4 can be priced per piece, per linear foot or per board foot. Pick the matching basis so the cost is right.
Buy planed hardwood by the rough size
A 4/4 board is planed to about 13/16 in, but you still pay for 1 in. Plan your thickness from the planed size and price from the rough size.
Round lengths up to stock lengths
Yards sell set lengths. Enter the length you will buy, not the length you will cut, and count the offcuts as part of the list.
أخطاء شائعة
- Using actual sizes (1 1/2 × 5 1/2) when the yard prices by nominal board feet.
- Mixing inches and feet: the length goes in feet, thickness and width in inches.
- Comparing a per-piece price with a per-board-foot price without converting.
أسئلة
How many board feet are in a 2 × 4 × 8?
2 × 4 × 8 / 12 = 5.33 board feet.
How many board feet are in a cubic metre?
About 424. One board foot is 144 cubic inches, or 0.00236 m³.
What does 4/4 or 8/4 mean?
Hardwood thickness in quarter inches: 4/4 is 1 in, 5/4 is 1 1/4 in, 8/4 is 2 in, measured rough before planing.
What is the difference between board feet and linear feet?
Linear feet measure length only. Board feet measure volume, so they depend on thickness and width too: 100 linear feet of 4/4 × 8 in is 66.7 board feet.
أدلة حول هذا الموضوع
- How to calculate board feet
The board foot formula with worked examples: nominal vs actual sizes, hardwood quarters (4/4, 8/4), board feet vs linear feet and cubic metres.
حاسبات ذات صلة
المصادر
- [1]What Is a Board Foot? (Forest and Wildlife Ecology Fact Sheet No. 42). University of Wisconsin–Madison, Department of Forest and Wildlife Ecology. A board foot is 12 in × 12 in × 1 in (144 in³); board feet = thickness (in) × width (in) × length (ft) / 12 with nominal sizes; a 10 ft 2x6 is 10 board feet, an 8 ft 1x8 5 1/3; actual sizes (1 1/2 × 5 1/2) give the true volume, 6.875 board feet.. تمت المراجعة في 12 نوفمبر 2026
- [2]The Board Foot: Definition and Formula. McIlvain Hardwoods. Hardwood thickness in quarters (4/4 = 1 in, 5/4 = 1 1/4 in, 8/4 = 2 in rough); board feet are figured on the rough thickness even when the board is sold surfaced; 100 lineal feet of 4/4 × 8 in is 66.7 board feet.. تمت المراجعة في 12 نوفمبر 2026
آخر مراجعة للمعادلات والمصادر في 12 نوفمبر 2026. كيف نحسب