Rebar calculator
Count the bars for a slab mesh, their total length with laps, the steel weight to order and the ties, from the slab size, cover and spacing on your drawing.
Slab
Concrete between the bar ends and the slab edge. Take it from the drawing.
Mesh
Centre to centre, as on the drawing.
Stock bars and laps
Length the supplier sells, often 6 m or 12 m, 20 ft or 40 ft. Leave empty to skip.
From the drawing or the engineer, for example 40 for 40 d. Needed only when a bar is longer than stock.
Add this calculator to your website
Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.
How to use it
- 01Enter the slab length and width, and the concrete cover at the edges from your drawing.
- 02Choose the bar size and the spacing both ways. For a mesh top and bottom, choose two layers.
- 03Enter the length of stock bars your supplier sells. If the slab is longer than a stock bar, enter the lap length from the design in bar diameters.
- 04Read the weight to order, the bar counts with their lengths, the stock bars and the number of crossings to tie.
How it is calculated
Each bar runs the slab length minus the cover at both ends. Bars start at the cover line on one side and are spaced up to the cover line on the other, so the count is the spread divided by the spacing, rounded down, plus one.
- Bar length
- L bar = L slab − 2 × cover
- Bar count
- n = floor((W slab − 2 × cover) / spacing) + 1
- Nominal mass
- m = π × d² / 4 × 7850 kg/m³
- Laps in one bar
- k = ceil((L bar − stock) / (stock − lap))
- Cut length
- L bar + k × lap
- Ties
- n along × n across × layers
US bar weights are the nominal values of ASTM bars as published by Caltrans: #3 0.376, #4 0.668, #5 1.043, #6 1.502 lb/ft and so on to #11. Metric bars use the nominal mass of steel at 7850 kg/m³, which matches the mill catalogue of EN 10080 bars (Ø12 0.89, Ø16 1.58 kg/m).
Stock bars are counted without reusing offcuts: when a bar fits into a stock bar several times, the pieces are cut from it, and the rest is waste.
The calculator does not choose bar size, spacing, cover or lap length. Those come from the structural design and the local code.
Worked example
Slab 20 × 12 ft, cover 3 in, #4 at 12 in each way, 20 ft stock
- Bars along: 12 − 2 × 0.25 = 11.5 ft to spread; 11.5 / 1 = 11, plus 1 = 12 bars of 19.5 ft.
- Bars across: 19.5 ft to spread; 19 + 1 = 20 bars of 11.5 ft.
- Length: 12 × 19.5 + 20 × 11.5 = 464 ft.
- Weight: 464 × 0.668 = 310 lb of #4.
- Stock: 12 + 20 = 32 bars of 20 ft; 12 × 20 = 240 crossings to tie.
Getting the order right
Order by weight, check by count
Suppliers price rebar by weight or by the piece. Keep the bar list with lengths so the delivery can be checked on site.
Offcuts are real
An 11.5 ft bar from 20 ft stock leaves 8.5 ft. Ask the supplier to cut to length if the waste matters more than the fee.
Supports are extra
Chairs, spacers and tie wire are not in the count. Add them from the supplier’s range.
Common mistakes
- Counting bars as slab width divided by spacing and forgetting the first bar.
- Running bars to the edge of the slab with no cover.
- Splicing long bars without a lap, or guessing the lap length.
- Forgetting the second layer of a top-and-bottom mesh.
Questions
How much does #4 rebar weigh?
0.668 lb per foot, the nominal weight of an ASTM #4 bar. A 20 ft bar weighs 13.4 lb.
How many bars do I need for a 20 × 12 ft slab at 12 in?
With 3 in cover, 12 bars of 19.5 ft one way and 20 bars of 11.5 ft the other: 464 ft of bar.
Why plus one bar?
Spacing counts gaps. A row with 11 gaps has 12 bars.
Can this tell me which bar size to use?
No. Bar size and spacing are structural design decisions. Use the values from your drawing or ask an engineer.
Guides on this topic
- Rebar weight per foot and per metre, and how to count the bars
Rebar weight per metre and per foot for #3 to #8 and 8 to 20 mm bars, how US sizes compare with mm, and how to count bars in a slab mesh.
Related calculators
Sources
- [1]Bridge Design Details 13.1 Reinforcement, Table 13.1.1 ASTM Standard Reinforcing Bar Data (September 2025). California Department of Transportation (Caltrans). US bar sizes #3 to #11: nominal diameter and nominal weight in lb/ft (#3 0.376, #4 0.668, #5 1.043, #6 1.502 …).. Checked November 5, 2026
- [2]Mill products catalogue: ribbed reinforcing bars, EN 10080 B500B. CMC Poland. Mass per metre of ribbed bars, e.g. Ø10 0.62, Ø12 0.89, Ø16 1.58, Ø20 2.47 kg; matches π d² / 4 × 7850 kg/m³.. Checked November 5, 2026
Formulas and sources last checked on November 5, 2026. How we calculate