Short answer
MAPEI Ultraplan Eco uses 1.6 kg/m² per mm, SAKRET Ausgleichsmasse 1.7 kg/m² per mm, and a 40 lb bag of Henry 555 LevelPro covers 43 sq ft at 1/8 in. At 5 mm, 20 m² needs about 160 kg of the MAPEI product, which is 7 bags of 23 kg.
Calculate it
Screed and self-levelling calculator
Bags from the average thickness of several measurements.
Screed and self-levelling calculator →Consumption per m² per mm
The data sheets give a figure in kilograms per square metre for each millimetre of layer. MAPEI lists 1.6 kg/m² per mm for Ultraplan Eco, a self-levelling smoothing compound sold in 23 kg bags. SAKRET lists about 1.7 kg/m² per mm for its Ausgleichsmasse universal, in 20 kg bags.
Henry gives coverage instead: one 40 lb bag of 555 LevelPro covers 43 sq ft at 1/8 in. That works out to 0.93 lb per sq ft at 1/8 in, or about 1.43 kg/m² per mm. These are the makers’ figures for an even substrate.
| Layer | MAPEI Ultraplan Eco (1.6) | SAKRET Ausgleichsmasse (1.7) | Henry 555 LevelPro (1.43) |
|---|---|---|---|
| 3 mm | 4.8 kg | 5.1 kg | 4.3 kg |
| 5 mm | 8.0 kg | 8.5 kg | 7.2 kg |
| 10 mm | 16.0 kg | 17.0 kg | 14.3 kg |
Bags for a given thickness
Multiply the area by the thickness in millimetres and by the consumption, then divide by the bag mass and round up. For 20 m² at 5 mm with MAPEI: 20 × 5 × 1.6 = 160 kg, and 160 ÷ 23 = 6.96, so 7 bags. At 3 mm the same floor needs 96 kg, which is 5 bags; at 10 mm it needs 320 kg, which is 14 bags. With SAKRET at 5 mm: 20 × 5 × 1.7 = 170 kg, and 170 ÷ 20 = 8.5, so 9 bags.
One bag covers less as the layer gets thicker. A 23 kg MAPEI bag covers about 4.8 m² at 3 mm, 2.9 m² at 5 mm and 1.4 m² at 10 mm. A 20 kg SAKRET bag covers about 3.9, 2.4 and 1.2 m².
In imperial units the Henry bag covers 43 sq ft at 1/8 in, 21.5 sq ft at 1/4 in and 14.3 sq ft at 3/8 in. A 400 sq ft room needs 400 ÷ 43 = 9.3, so 10 bags at 1/8 in, and 800 ÷ 43 = 18.6, so 19 bags at 1/4 in.
If the floor is uneven, the layer is thicker in the low spots. Use the average thickness over the whole area in the calculation.
Minimum and maximum layer
The limits come from the product, not from the calculation. SAKRET lists 3 to 20 mm for Ausgleichsmasse universal. MAPEI lists 1 to 10 mm per layer for Ultraplan Eco. Henry requires at least 1/8 in over the highest points of the subfloor, and its sheet gives no maximum, only that the material may be featheredged to the existing level.
If the floor needs more than the maximum, read the sheet for what the maker allows. Do not stack layers on a guess; the figures above are per layer for MAPEI.
Cement screed is calculated per centimetre
Cement screed is thicker, so the consumption is given per centimetre. SAKRET lists about 20 kg/m² per cm for its Beton-Estrich on even substrates, in bags of 10, 25 and 40 kg.
The layer depends on the build-up: 30 to 60 mm bonded to the substrate, 35 to 60 mm on a separating layer and 40 to 60 mm floating on insulation. For a heated screed, SAKRET adds the pipe diameter to the thickness.
| Thickness | Per m² | 30 m² in 25 kg bags |
|---|---|---|
| 30 mm | 60 kg | 72 bags |
| 40 mm | 80 kg | 96 bags |
| 50 mm | 100 kg | 120 bags |
| 60 mm | 120 kg | 144 bags |
The same 30 m² at 50 mm is 3,000 kg, which is 75 bags of 40 kg. The screed calculator linked below takes the area, thickness and product and returns the weight and bags.
Questions
How much self-leveling compound per square metre per mm?
MAPEI Ultraplan Eco lists 1.6 kg/m² per mm; SAKRET Ausgleichsmasse universal lists about 1.7 kg/m² per mm.
How many bags of self-leveler do I need?
Area × thickness in mm × kg per m² per mm, divided by the bag mass and rounded up. For 20 m² at 5 mm with MAPEI that is 7 bags of 23 kg.
How thick can I pour self-leveling compound?
It depends on the product: SAKRET 3 to 20 mm, MAPEI Ultraplan Eco 1 to 10 mm per layer. Henry gives a minimum of 1/8 in and no maximum.
How much does a bag of Henry 555 LevelPro cover?
A 40 lb bag covers 43 sq ft at 1/8 in thickness, according to Henry.
How much cement screed per m² per cm?
SAKRET lists about 20 kg/m² per cm on even substrates, so a 50 mm screed needs about 100 kg/m².
What thickness for a cement screed?
SAKRET lists 30 to 60 mm bonded, 35 to 60 mm on a separating layer and 40 to 60 mm floating on insulation.
Calculate it
Screed and self-levelling calculator
Bags from the average thickness of several measurements.
Screed and self-levelling calculator →Sources
- [1]Technisches Merkblatt SAKRET Beton-Estrich (Stand 14.06.2018). SAKRET Trockenbaustoffe Europa GmbH & Co. KG. Cement screed: about 20 kg/m² per cm on even substrates; bonded 30–60 mm, on a separating layer 35–60 mm, floating on insulation 40–60 mm; bags of 10, 25 and 40 kg.. Checked November 5, 2026
- [2]Technisches Merkblatt SAKRET Ausgleichsmasse universal (Stand 13.02.2018). SAKRET Trockenbaustoffe Europa GmbH & Co. KG. Levelling compound: about 1.7 kg/m² per mm; 3–20 mm; 20 kg bag.. Checked November 5, 2026
- [3]Ultraplan Eco: product page and technical data. MAPEI. Self-levelling smoothing compound: 1.6 kg/m² per mm; 1 to 10 mm per layer; 23 kg bag.. Checked November 5, 2026
- [4]HENRY 555 LevelPro Self-Leveling Underlayment, product data. W. W. Henry Company. 40 lb bag covers 43 sq ft at 1/8 in (1.43 kg/m² per mm); at least 1/8 in over the high points.. Checked November 5, 2026