Vai al contenuto
Yardox
Questa versione linguistica è in fase di revisione da parte di un madrelingua. Alcune formulazioni potrebbero cambiare.

How much plaster per square metre: consumption per mm and bags for a wall

Plaster is bought by the bag but spread by the millimetre. The bag count is the wall area times the thickness times the consumption per mm, divided by the bag weight.

Aggiornato il 10 novembre 2026

In breve

Knauf Rotband Pro uses 8.6 kg/m² at 10 mm, so one 30 kg bag covers 3.5 m². Knauf MP 75 uses 12 kg/m² at 10 mm and Baumit KZP 65 about 1.4 kg/m² per mm. A 24 m² wall at 10 mm takes 7 bags of Rotband Pro.

Calcola

Calcolatore intonaco

Sacchi di intonaco a base gesso o calce-cemento e di rasante per le tue pareti.

Calcolatore intonaco →

Consumption per m² per mm

Every data sheet gives plaster consumption as kilograms per square metre per millimetre of thickness. Gypsum hand plaster, gypsum machine plaster and lime-cement plaster differ a lot (0.86 to 1.4 kg/m² per mm), so the product name matters more than the room.

Consumption of dry mortar, from the data sheets
Productkg/m² per mmkg/m² at 10 mmBagm² per bag at 10 mm
Knauf Rotband Pro (gypsum, by hand)0.868.630 kg3.5
Knauf MP 75 Diamant (gypsum, machine)1.21230 kg2.5
Baumit KZP 65 (lime-cement)1.41435 kg2.5

In pounds per square foot, 1 kg/m² is 0.205 lb/sq ft. Rotband Pro at 10 mm (about 3/8 in) is 1.76 lb/sq ft, MP 75 is 2.46 lb/sq ft and KZP 65 is 2.87 lb/sq ft.

Bags for a wall

Take the wall area, subtract large openings, multiply by the thickness in mm and by the kg/m² per mm, divide by the bag weight and round up. A 24 m² wall plastered 10 mm thick:

24 m² at 10 mm
ProductMortarBags
Rotband Pro206 kg7 × 30 kg
MP 75288 kg10 × 30 kg
KZP 65336 kg10 × 35 kg

In imperial units, 300 sq ft (27.9 m²) at 10 mm needs about 240 kg of Rotband Pro, which is 8 bags, or 334 kg of MP 75, which is 12 bags. Knauf notes on the Rotband Pro sheet that the exact consumption should be confirmed with a trial application on the job, and uneven walls always take more than the average thickness suggests.

Thicker coats

Consumption scales with thickness, so a wall that needs 15 mm of build-up costs half as much again as one plastered at 10 mm.

kg per m² at different thicknesses
ThicknessRotband ProMP 75KZP 65
5 mm4.36.07.0
10 mm8.612.014.0
15 mm12.918.021.0

Layer limits

The data sheets set a minimum and a maximum thickness per coat. Going outside them risks cracks, sagging or a coat that does not set properly.

Second coat ≥ 10 mmFirst coat, roughened ≥ 10 mmMasonry > 20 mm
Baumit KZP 65: a base coat of at least 10 mm indoors. Above 20 mm, build up in several coats, about one day per mm between coats, roughening each one before the next.
  • Knauf Rotband Pro: 5 to 50 mm in one coat, 10 mm average. On concrete ceilings only one coat, up to 15 mm.
  • Knauf MP 75 Diamant: 10 mm average, 8 mm minimum, up to 50 mm. The sheet advises two layers above 35 mm to shorten drying.
  • Baumit KZP 65: base coat at least 10 mm inside and 15 mm outside. Above 20 mm, and in unfavourable conditions, apply in several coats, leaving about one day per mm of thickness before the next coat and roughening the previous one.

Skim coat

Knauf Rotband Flächenspachtel Plus is a ready-mixed filler and uses about 1.1 kg/m² per mm (0.225 lb/sq ft). It is applied from 0 to 5 mm, with the first coat up to 3 mm.

Example: 25 m² of wall skimmed in two passes to 2 mm total takes 25 × 2 × 1.1 = 55 kg. The sheet lists 4, 10 and 20 kg pails, so that is three 20 kg pails. One 20 kg pail covers about 18 m² at 1 mm.

Domande

How many square metres does a 30 kg bag of plaster cover?

Knauf Rotband Pro covers 3.5 m² at 10 mm, and Knauf MP 75 about 2.5 m² (12 kg/m² at 10 mm; the sheet rounds it to 2.6). Halve the thickness and the area doubles.

How much plaster do I need per square foot?

At 10 mm, about 1.76 lb/sq ft of Rotband Pro, 2.46 lb/sq ft of MP 75 or 2.87 lb/sq ft of KZP 65.

How thick can I apply plaster in one coat?

Knauf lists up to 50 mm in one coat for Rotband Pro and MP 75, and Baumit asks for several coats above 20 mm for KZP 65. A skim filler like Flächenspachtel Plus goes on in coats of 3 mm or less for the first pass.

How much skim coat do I need?

About 1.1 kg per m² for every mm of thickness. A 2 mm coat on 25 m² takes 55 kg.

Why does the bag cover less than the pack says?

The pack figure is for the stated thickness on an even wall. Real walls are uneven, so the plaster goes on thicker in places, which is why the data sheet suggests a trial application.

Calcola

Calcolatore intonaco

Sacchi di intonaco a base gesso o calce-cemento e di rasante per le tue pareti.

Calcolatore intonaco →

Fonti

  1. [1]Technisches Blatt Knauf Rotband Pro, Haftputzgips zum Glätten (P121a.de, 06/2014). Knauf Gips KG. Gypsum hand plaster: 8.6 kg/m² at 10 mm; one coat 5–50 mm, average 10 mm; concrete ceilings one coat up to 15 mm; 30 kg bag.. Verificato il 5 novembre 2026
  2. [2]Technisches Blatt Knauf MP 75 Diamant, Gipsmaschinenputz (P111a.de, 09/2013). Knauf Gips KG. Gypsum machine plaster: 12.0 kg/m² at 10 mm; wall average 10 mm, minimum 8 mm, up to 50 mm in one coat; 30 kg bag.. Verificato il 5 novembre 2026
  3. [3]Produktdatenblatt Baumit KalkzementPutz KZP 65 (Stand 10-05/20). Baumit GmbH. Lime-cement plaster: about 1.4 kg/m² per mm; base coat at least 10 mm inside, 15 mm outside; over 20 mm in several coats; 35 kg bag.. Verificato il 5 novembre 2026
  4. [4]Technisches Merkblatt Knauf Rotband Flächenspachtel Plus (10.2025). Knauf Bauprodukte GmbH & Co. KG. Ready-mixed skim filler: about 1.1 kg/m² per mm; 0–5 mm, first coat up to 3 mm; 4, 10, 20 kg pails.. Verificato il 5 novembre 2026