W skrócie
Yield = roof area × rainfall × collection efficiency. On 1 m² of roof, 1 mm of rain is 1 litre; on 1 ft², 1 in of rain is 0.62 gallons. The simplified DIN 1989-1 method sizes the tank at 6 % of the smaller of the yearly yield and the yearly use, about three weeks of supply.
Policz sam
Kalkulator zbiornika na deszczówkę
Pojemność zbiornika na podstawie powierzchni dachu, opadów i zużycia deszczówki.
Kalkulator zbiornika na deszczówkę →How much water a roof collects
Rain falling on the plan area of the roof, not the sloped surface, ends up in the gutter. Some is lost to splash, evaporation and the first flush. The Texas Water Development Board manual says installers assume 75 to 90 % collection efficiency, and its planning page uses about 80 %.
- Metric: yield (l) = roof area (m²) × rainfall (mm) × efficiency.
- US: yield (gal) = roof area (ft²) × rainfall (in) × 0.62 × efficiency.
TWDB example: a 2,000 ft² roof at 80 % gives about 1,000 gallons for every inch of rain.
How big a tank: the DIN 1989-1 rule
The simplified method of DIN 1989-1, as explained by the Bavarian water authority, works out both the yearly yield and the yearly demand, takes the smaller one, and multiplies it by 0.06. That covers about three weeks without rain. A bigger tank fills rarely; a smaller one overflows in wet weeks and runs dry in dry ones.
The same guide gives a quick check: with 600 to 1,200 mm of rain a year, hard roofs need about 25 to 50 litres of storage per m² of roof, green roofs 10 to 20 litres. For garden watering it gives 80 to 200 litres per m² of garden per year.
Worked example: 100 m² roof, garden watering
- Yield: 100 m² × 700 mm × 0.8 = 56,000 l a year.
- Use: 150 m² of garden × 100 l = 15,000 l a year.
- The smaller is the use: 15,000 × 0.06 = 900 l. A 1,000 l tank is enough.
- With 40,000 l of use a year, for example toilets as well: 40,000 × 0.06 = 2,400 l.
First flush
The first rain after a dry spell washes dust, leaves and bird droppings off the roof. A first-flush diverter sends it away before the tank. The Texas manual recommends diverting 1 to 2 gallons per 100 ft² of roof, about 0.4 to 0.8 litres per m². For a 2,000 ft² roof that is 20 to 40 gallons.
Tile and shingle roofs lose about 10 % more to absorption and evaporation than smooth metal roofs, according to the same manual. Use the lower end of the efficiency range for them.
Pytania
How many litres of water from 1 mm of rain?
One litre per square metre of roof plan area, before losses.
How many gallons from 1 inch of rain?
0.62 gallons per square foot of roof, before losses. A 1,000 ft² roof gives 620 gallons, about 500 at 80 % efficiency.
Should the tank hold a whole year of rain?
No. DIN 1989-1 sizes it at about three weeks of supply, 6 % of the smaller of yield and use. A larger tank rarely fills.
Do I measure the sloped roof or the plan area?
The plan area: the footprint of the roof seen from above, including the overhangs.
Policz sam
Kalkulator zbiornika na deszczówkę
Pojemność zbiornika na podstawie powierzchni dachu, opadów i zużycia deszczówki.
Kalkulator zbiornika na deszczówkę →Źródła
- [1]The Texas Manual on Rainwater Harvesting, 3rd edition (2005). Texas Water Development Board. Supply = rainfall (in) × roof area (ft²) × 0.62 gal/ft² per inch × collection efficiency (p. 38); installers assume 75 to 90 % efficiency (p. 30); about 10 % loss on tile and shingle roofs (p. 6); first-flush diversion of 1 to 2 gallons per 100 ft² of roof (p. 8).. Sprawdzono 11 listopada 2026
- [2]Rainwater Volumes from Roof Runoff. Texas Water Development Board. Collection efficiency of about 80 % for planning: roughly 1,000 gallons per inch of rain on a 2,000 ft² roof.. Sprawdzono 11 listopada 2026
- [3]Hinweise zur Regenwassernutzung (November 2004). Bayerisches Landesamt für Wasserwirtschaft. Storage after DIN 1989-1: work out the volume from the yield and from the demand, take the smaller; × 0.06 gives the average reserve for three weeks. For 600 to 1,200 mm of rain, hard roofs give 25 to 50 l and green roofs 10 to 20 l of storage per m²; households 800 to 1,000 l per resident; gardens 80 to 200 l per m² and year.. Sprawdzono 11 listopada 2026