Paint calculator
Work out how much wall and ceiling paint you need for a room, with doors and windows taken off, and which cans to buy so that little is left over.
What are you painting?
Paint
Two coats is the usual finish, and a must when you change colour.
Coverage as printed by the maker. Take your own paint's figure if it differs.
Add this calculator to your website
Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.
How to use it
- 01Enter the length and width of the room and the wall height. Tick the ceiling if you paint it too. For a feature wall or a hallway, switch to "Single wall".
- 02Subtract doors and windows. Use the quantity field for identical windows instead of adding each one.
- 03Set the number of coats. Two is the normal finish; one coat may be enough only when you repaint in the same colour.
- 04Choose a paint or enter the coverage printed on your can, and the can sizes your shop sells.
- 05Read the litres (or gallons) you need and the cheapest-to-waste combination of cans, then copy the list.
How it is calculated
Paint is sold by volume but used by area, so we first find the area to paint and then divide by the coverage of the paint.
- Walls of a room
- S = 2 × (L + W) × H
- Minus openings
- S = S − Σ (width × height × quantity)
- Ceiling
- S ceiling = L × W
- Paint
- litres = S × coats / coverage
- Cans
- least volume ≥ litres; then fewest cans
Paint makers give coverage as a range, for example 8–12 m²/l for Tikkurila Harmony or 250–400 sq ft per gallon for BEHR PREMIUM PLUS Flat. Smooth, sealed walls reach the upper figure; porous plaster, fresh drywall and rough surfaces use more paint. We show the full range and pick cans for the lower coverage, so you do not run short in the middle of a wall.
To choose cans we try every combination of the sizes you can buy and keep the one with the least paint left over; if two leave the same amount, the one with fewer cans wins. That is why 10.4 litres becomes one 9 l can and two 0.9 l cans rather than four 2.7 l cans.
We round only once, when choosing cans, so nothing is lost to rounding on the way.
Worked example
Room 4 × 5 m, walls 2.5 m high, a door and a window, two coats
- Walls: 2 × (4 + 5) × 2.5 = 45 m². Door 0.9 × 2.0 = 1.8 m², window 1.2 × 1.4 = 1.68 m². Area to paint: 45 − 1.8 − 1.68 = 41.52 m².
- Two coats: 83.04 m². At 12 m²/l that is 6.92 l; at 8 m²/l, 10.38 l.
- With 0.9, 2.7 and 9 l cans: one 9 l and two 0.9 l cans, 10.8 l in total, 0.42 l left over.
- With the ceiling (4 × 5 = 20 m²) the area becomes 61.52 m² and the paint 10.25–15.38 l.
Getting the order right
Prime new or patched surfaces
Fresh plaster, new drywall and filled patches soak up the first coat unevenly. A primer or a thinned first coat, as the paint maker specifies, gives an even finish and saves top coat.
Keep a little for touch-ups
A small amount of the same batch is the easiest way to hide scuffs later. Write the colour code and the batch number on the lid.
Mix cans of a tinted colour
If you need several cans of a tinted colour, pour them into one bucket before you start (boxing), so that small differences between cans do not show on the wall.
Common mistakes
- Taking the best-case coverage from the can and running out on a porous wall.
- Forgetting the second coat when changing colour.
- Subtracting a door or a window twice, or not at all.
- Typing coverage in sq ft per gallon into a field that expects m² per litre (about 40 times different).
- Buying many small cans: they cost more per litre than one large can.
Questions
How much paint do I need for a 12 × 14 ft room?
With 8 ft walls, one 3 × 6⅔ ft door and one 3 × 4 ft window, the walls are 416 − 20 − 12 = 384 sq ft. Two coats at 250–400 sq ft per gallon need 1.9–3.1 gallons. The ceiling adds 168 sq ft per coat.
How many square metres does a litre of paint cover?
Interior wall paint usually covers 8–12 m² per litre per coat on smooth walls, as on the Tikkurila Harmony data sheet. Check your own can: the figure is printed as coverage or spreading rate.
Do I need two coats?
Usually yes. Both data sheets we use recommend up to two coats, and a change of colour almost always needs two for an even finish.
Should I subtract doors and windows?
Yes for a normal room: a door is 1.5–2 m² (about 20 sq ft) of wall that you do not paint. The trim around it needs a different paint anyway.
Guides on this topic
- How much does a gallon of paint cover?
Paint coverage per gallon and per litre from real data sheets, a conversion table between sq ft/gal and m²/l, and how many gallons typical rooms need.
Sources
- [1]Harmony – Product Data Sheet (06.11.2024). Tikkurila. Theoretical coverage 8–12 m²/l; 1–2 coats; packs 0.225, 0.9, 2.7, 3.6, 7.2, 9 and 18 l. Checked November 5, 2026
- [2]BEHR PREMIUM PLUS Interior Flat – product page for professionals. Behr. Coverage 250–400 sq ft per gallon depending on application method and substrate porosity; quart, gallon and 5-gallon containers. Checked November 5, 2026
- [3]NIST Handbook 44, Appendix C – General Tables of Units of Measurement. National Institute of Standards and Technology. US gallon = 231 in³ = 3.785411784 l; quart = ¼ gallon. Checked November 5, 2026
Formulas and sources last checked on November 5, 2026. How we calculate