Skip to content
Yardox

How much does a gallon of paint cover?

The coverage on a paint can is a range, not a promise. Knowing where your walls sit in that range is the difference between one trip to the store and three.

Updated November 6, 2026

Short answer

A gallon of interior wall paint covers about 250–400 sq ft per coat; BEHR PREMIUM PLUS Flat lists exactly that range. In metric, Tikkurila Harmony lists 8–12 m² per litre. For a 12 × 14 ft room with two coats on the walls, buy 2 to 3 gallons.

Calculate it

Paint calculator

Litres for walls and ceilings and the best mix of cans.

Paint calculator →

Why coverage is a range

The low figure is for porous or rough surfaces: bare plaster, new drywall, textured walls, or paint applied with a thick-nap roller. The high figure is for smooth, sealed walls that have been painted before. Spraying and brushing also change it.

Plan with the low figure. If the walls turn out to be smooth, the leftover paint keeps for touch-ups. Running short in the middle of a wall is worse, because a can from a later tint can look slightly different.

Converting sq ft per gallon and m² per litre

US cans state coverage in square feet per gallon, European cans in square metres per litre. A US gallon is 3.785 litres and a square metre is 10.76 square feet, so the conversion factor is about 40.7.

Coverage of one coat
sq ft per US gallonm² per litre
2506.1
3007.4
3268.0
3508.6
4009.8
48912.0

The usual mistake is typing a sq ft/gal figure into a box that expects m²/l. A coverage of 350 m²/l does not exist; if a calculator lets you enter it, the result is 40 times too small.

How many gallons for a room

Walls 8 ft high, one door (3 × 6⅔ ft) and one window (3 × 4 ft) subtracted, two coats, at 400 and at 250 sq ft per gallon:

Door 3 × 6⅔ ftWindow 3 × 4 ftWall area to paintPerimeter 2 × (L + W)Height 8 ft
Paint covers the walls minus the openings: perimeter × height, less doors and windows, times the number of coats.
Walls only, two coats
RoomWall areaPaint for two coats
10 × 10 ft288 sq ft1.4–2.3 gal
10 × 12 ft320 sq ft1.6–2.6 gal
12 × 14 ft384 sq ft1.9–3.1 gal
14 × 16 ft448 sq ft2.2–3.6 gal

The ceiling is the floor area again: a 10 × 12 ft ceiling with two coats adds 0.6–1.0 gallon. Ceiling paint is usually a different product, so it is a separate purchase anyway.

The same in metric

Walls 2.5 m high, a door of 0.9 × 2.0 m and a window of 1.2 × 1.4 m subtracted, two coats, at 12 and at 8 m² per litre:

Walls only, two coats
RoomWall areaPaint for two coats
3 × 3 m26.5 m²4.4–6.6 l
3 × 4 m31.5 m²5.3–7.9 l
4 × 5 m41.5 m²6.9–10.4 l
5 × 6 m51.5 m²8.6–12.9 l

Choosing cans

Work out the litres or gallons first, then buy the combination of can sizes that leaves the least paint over. For 10.4 litres with 0.9, 2.7 and 9 l cans, that is one 9 l can and two 0.9 l cans (10.8 l). Four 2.7 l cans hold the same 10.8 l, but that is four cans instead of three. For a whole flat or house, compare the price of a 5-gallon bucket or a 9 l can with the same volume in small cans.

Questions

How many square feet does a gallon of paint cover?

About 250–400 sq ft per coat for interior wall paint. Use the lower figure for new drywall, bare plaster or textured walls.

How many square metres does a litre of paint cover?

Usually 8–12 m² per coat on smooth walls. The exact figure is on the can or the data sheet as coverage or spreading rate.

How much paint for a 12 × 14 room?

With 8 ft walls, a door and a window, the walls are 384 sq ft. Two coats need 1.9–3.1 gallons, so buy 2 gallons for smooth repainted walls and 3 for new drywall.

Do I need a primer on new drywall?

Follow the paint maker's instructions. New drywall and fresh plaster absorb the first coat unevenly, which is why both coverage and finish suffer without a primer or a thinned first coat.

Calculate it

Paint calculator

Litres for walls and ceilings and the best mix of cans.

Paint calculator →

Sources

  1. [1]Harmony – Product Data Sheet (06.11.2024). Tikkurila. Theoretical coverage 8–12 m²/l; 1–2 coats; packs 0.225, 0.9, 2.7, 3.6, 7.2, 9 and 18 l. Checked November 5, 2026
  2. [2]BEHR PREMIUM PLUS Interior Flat – product page for professionals. Behr. Coverage 250–400 sq ft per gallon depending on application method and substrate porosity; quart, gallon and 5-gallon containers. Checked November 5, 2026
  3. [3]NIST Handbook 44, Appendix C – General Tables of Units of Measurement. National Institute of Standards and Technology. US gallon = 231 in³ = 3.785411784 l; quart = ¼ gallon. Checked November 5, 2026