Asphalt calculator
Find how many tonnes of asphalt to order for a driveway, path or yard.
Your surface
Area × compacted thickness × density of the laid asphalt, with the factors US highway departments use for estimating.
Size and mix
Thickness after rolling, per layer you are ordering.
For edges, low spots in the base and handling.
Optional, to count truck loads.
Add this calculator to your website
Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.
使い方
- 01Enter the length and width of the driveway, path or yard.
- 02Enter the thickness after rolling. For two layers, a base and a surface course, work out each layer separately.
- 03Choose the mix if you know it; otherwise keep the general estimate.
- 04Read the tonnes to order. Asphalt plants sell by weight, not by volume.
計算方法
Asphalt is ordered by weight. The weight is the compacted volume times the density of the rolled mix. US highway departments publish the factors they use to estimate quantities, and the calculator uses those.
- Volume
- length × width × compacted thickness
- Weight
- volume × density × (1 + extra)
- US method
- tons = yd² × lb per yd² per inch × inches / 2000
Washington State DOT estimates hot mix asphalt at 2.05 tons per cubic yard, about 2,430 kg/m³. Tennessee DOT lists factors per square yard and inch of thickness: 106 lb for a dense surface mix, 115 lb for a dense base mix and 88 lb for a porous open-graded mix. One pound per square yard and inch is 21.36 kg/m³.
The extra covers edges, low spots in the base and material left in the truck. The calculator starts at 5 %; a well-graded, rolled base needs less, a rough one more.
The calculator does not size the pavement. How thick the layers must be depends on the traffic and the ground, and is set by the contractor or a design.
計算例
A 10 × 3 m driveway, 50 mm surface course
- Volume: 10 × 3 × 0.05 = 1.5 m³.
- Weight: 1.5 × 2,432 = 3,648 kg, plus 5 %: 3.83 t.
- The same drive in US units, 30 × 10 ft and 2 in of surface mix: 33.3 yd² × 106 × 2 / 2000 = 3.5 tons before the extra.
発注時のポイント
Order by weight
Plants weigh every truck. Give them the tonnes, the mix and the time you can start laying, because hot mix has to be laid and rolled while it is hot.
Prepare the base first
Asphalt is only as good as the compacted base under it. The aggregate calculator finds the crushed stone for the base layer.
Measure the thickness after rolling
Loose asphalt behind the paver is thicker than the finished layer. Specify and check the compacted thickness.
よくある間違い
- Using the loose thickness instead of the compacted one.
- Counting a base and a surface course as one layer with one mix.
- Ordering by volume from a plant that sells by weight.
- Forgetting the extra for edges and an uneven base, and running short on the last metres.
よくある質問
How many tons of asphalt do I need for a driveway?
Area in square yards × 110 lb or so per square yard per inch × inches of thickness / 2000. A 30 × 10 ft drive with 2 in of surface mix needs about 3.5 tons.
How much does a cubic metre of asphalt weigh?
About 2.4 t once rolled. Washington State DOT estimates 2.05 tons per cubic yard, about 2,430 kg/m³; porous mixes are lighter.
How thick should a driveway be?
It depends on the traffic and the ground under it. Ask the contractor; the calculator works out the weight for whatever thickness is chosen.
関連する計算ツール
出典
- [1]WSDOT Design Manual M 22-01, Chapter 620, Exhibit 620-2: Estimating hot mix asphalt pavement. Washington State Department of Transportation. Hot mix asphalt for estimating: 137 lb per square yard for 0.10 ft compacted depth, which is 2.05 tons per cubic yard.. 確認日: 2026年11月11日
- [2]Instructional Bulletin 16-11: Computations for asphalt mixes (2016-08-19). Tennessee Department of Transportation. Tons = area (yd²) × lb per yd² per inch of thickness / 2000. Factors: base mix grading A 115, surface mix grading D 106, open-graded friction course 88 lb per yd² per inch.. 確認日: 2026年11月11日
計算式と出典の最終確認日: 2026年11月11日。 計算方法