本文へ移動
Yardox
この言語版はネイティブ話者による確認中です。表現が変わる場合があります。

Gutter and downspout size: how many downspouts a roof needs

Gutters overflow for one of two reasons: the downspouts are too small or too few, or they are too far apart. Both are easy to check once you know the roof area that drains into each gutter.

更新日: 2026年11月18日

要点

At a rainfall intensity of 1 in per hour, each square inch of downspout drains 1,200 sq ft of roof. Divide by your local design rainfall, multiply the roof plan area by a pitch factor, and use one downspout for every 50 ft of gutter at most.

計算する

雨樋・竪樋計算

屋根の片側に必要な竪樋の本数、軒樋のサイズ、管の長さ。

雨樋・竪樋計算 →

The area that drains into a gutter

Measure the roof from above: the gutter length times the horizontal depth from the eave to the ridge. Steep roofs catch more wind-driven rain, so the Copper Development Association multiplies the plan area by a factor.

Gutter lengthDepthRidgePlan areaGutterDownspout
Plan area that drains into one gutter: gutter length × horizontal depth from eave to ridge.
Pitch factor (CDA Table 10C)
Roof pitchFactor
Flat to 3 in 121.00
4 to 5 in 121.05
6 to 8 in 121.10
9 to 11 in 121.20
12 in 121.30

Downspout size and count

CDA Table 10A lists, for many US cities, how many square feet of roof one square inch of downspout drains in the 5-minute storm that comes once in 10 years and once in 100 years. Chicago, for example: 180 sq ft for the 10-year storm, 130 for the 100-year storm.

  • Downspout section needed = plan area × pitch factor / local sq ft per sq in.
  • Use the actual inside section of the downspout, not its nominal size: a 2 × 3 in rectangular downspout has 4.80 sq in, a 3 × 4 in 10.31, a 3 in round 5.94, a 4 in round 11.04 (GutterSupply).
  • At least one downspout per 50 ft of gutter.
  • CDA asks for downspouts of at least 7 sq in, except on small areas such as porches. A 2 × 3 in downspout is below that.

Worked example: Chicago, 40 ft gutter

The gutter is 40 ft long, the depth to the ridge is 15 ft, the pitch is 6 in 12.

  • Plan area: 40 × 15 = 600 sq ft. With the factor 1.10: 660 sq ft.
  • 10-year storm, 180 sq ft per sq in: 660 / 180 = 3.7 sq in of downspout.
  • One 3 × 4 in downspout (10.31 sq in) drains 10.31 × 180 = 1,856 sq ft. One is enough, and 40 ft is within the 50 ft limit.
  • Designing for the 100-year storm (130 sq ft per sq in): 660 / 130 = 5.1 sq in, still one 3 × 4 in downspout.

Metric roofs: gutter and pipe sizes

European gutter makers publish tables by roof plan area for a design rainfall. Marley Germany, for 300 l/(s·ha):

Roof plan area per outlet (Marley, 300 l/(s·ha))
Plan area per outletGutterDownpipe
up to 25 m²RG 70 or RG 75DN 53
up to 51 m²RG 100DN 75 / DN 90
up to 100 m²RG 125DN 90 / DN 105
up to 159 m²RG 150DN 105

A second outlet halves the area each one drains, which often allows a smaller gutter. A 10 × 5 m roof face (50 m²) takes RG 100 with one outlet, or RG 75 with two.

よくある質問

How many downspouts do I need?

Enough section for the roof area at your local rainfall, and at least one for every 50 ft of gutter.

Is a 2 × 3 downspout big enough?

Only for small areas such as porches. CDA asks for at least 7 sq in, and a 2 × 3 in downspout has 4.80 sq in inside.

Do I use the sloped roof area?

No. Use the plan area seen from above and multiply it by the pitch factor.

What gutter size for a 100 m² roof?

With Marley gutters at 300 l/(s·ha), RG 125 with one DN 90 or DN 105 outlet, or RG 100 with two outlets of 50 m² each.

計算する

雨樋・竪樋計算

屋根の片側に必要な竪樋の本数、軒樋のサイズ、管の長さ。

雨樋・竪樋計算 →

出典

  1. [1]Copper in Architecture: 10.1 Hung Gutters and Downspouts Basics (Tables 10A, 10C). Copper Development Association. Area drained per square inch of downspout by city for 10-year and 100-year 5-minute storms (1,200 sq ft per sq in at 1 in/hr); plan area × pitch factor (level–3 in/ft 1.00, 4–5 1.05, 6–8 1.10, 9–11 1.20, 12 1.30); each downspout drains at most 50 ft of gutter; downspouts at least 7 sq in except small areas such as porches.. 確認日: 2026年11月10日
  2. [2]Gutter sizing (Table 1-3, downspout areas). GutterSupply. Actual cross-section of downspouts: 2×3 in plain rectangular 4.80 sq in (nominal 6.00), 3×4 in 10.31 (12.0), 3 in round 5.94 (7.07), 4 in round 11.04 (12.57).. 確認日: 2026年11月10日
  3. [3]Marley Dachrinnensysteme: Bemessungstabelle. Marley Deutschland. At a rainfall of 300 l/(s·ha): up to 25 m² roof plan area RG 70 or RG 75 with DN 53; up to 51 m² RG 100 with DN 75/90; up to 100 m² RG 125 with DN 90/105; up to 159 m² RG 150 with DN 105. Two outlets halve the area each one drains.. 確認日: 2026年11月10日