Skip to content
Yardox

Brick and block calculator

Work out bricks or blocks for a wall and the mortar to lay them, from the unit size and joints rather than a rule of thumb.

Walls

01Wall 1
Wall 116 ft8 ft
ft²

Leave empty if there are none.

Brick or block

in
in
in
in
in

Usually ⅜ in. Modular coursing (3 courses = 8 in) gives about 0.42 in.

Wall thickness with joints: 3.62 in.

Waste and mortar bags

%

BIA: at least 5 %.

%

BIA: 15–25 %.

ft³

The yield printed on the bag. Leave empty to skip.

Units to buy778 units· 7.2 ft³
Add this calculator to your website

Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.

How to use it

  1. 01Enter the length and height of each wall and the total area of doors and windows in it.
  2. 02Choose a brick format or enter your own size, with the head joint (vertical) and bed joint (horizontal) you will lay.
  3. 03Set how many units sit across the wall thickness: 1 for a single wythe, 2 for a double wall with a filled joint between.
  4. 04Keep the waste allowances from the Brick Industry Association unless you know better: 5 % on units, 15–25 % on mortar.
  5. 05Enter the yield from the mortar bag to get a bag count, then copy the list.

How it is calculated

Each unit takes up its own size plus one head joint and one bed joint on the wall face. Mortar is everything in the wall that is not brick.

Units per area
n = 1 / ((length + head joint) × (height + bed joint)) × units across
Wall thickness
t = units across × depth + (units across − 1) × joint
Units
⌈ net area × n × (1 + waste) ⌉
Mortar
net area × t − units × length × height × depth
Mortar to buy
mortar × (1 + waste)

This geometry reproduces the published tables. For modular brick with ⅜ in joints it gives 5.5 cu ft of mortar per 100 sq ft, as in BIA Technical Note 10. The BIA brick count, 675 per 100 sq ft, assumes modular coursing of 3 courses to 8 in; with joints of exactly ⅜ in it is 686.

German NF bricks (240 × 115 × 71 mm) with a 10 mm head joint and a 12 mm bed joint give 48.2 per m² in a 115 mm wall.

Hollow concrete blocks are usually laid on the face shells only, so the mortar is far less than the geometry suggests. For them we count units only.

Waste is added once, at the end: BIA recommends at least 5 % on brick and 15–25 % on mortar.

Worked example

Wall 5 × 2.5 m with a 1.8 m² door, NF bricks, 115 mm thick

  1. Net area: 5 × 2.5 − 1.8 = 10.7 m².
  2. Bricks per m²: 1 / (0.25 × 0.083) = 48.19. 10.7 × 48.19 = 515.7, plus 5 % = 541.4, so 542 bricks.
  3. Mortar per m²: 0.115 − 48.19 × 0.24 × 0.115 × 0.071 = 0.0206 m³. For the wall 0.220 m³, plus 20 % = 264 litres.

Getting the order right

Lay out a dry course first

Lay the first course without mortar to check the joints and the cuts at the ends. Adjusting the head joints slightly is easier than cutting every brick.

Buy from one batch

Face brick varies in colour between batches. Buy the full quantity at once, and blend bricks from several pallets as you lay.

Mix only what you can use

Mortar has a limited working time, so mix in batches. Check the time on the bag.

Common mistakes

  • Using brick size without joints, which overstates the count by 10 % or more.
  • Forgetting the collar joint between two wythes when estimating mortar.
  • Estimating mortar for hollow blocks as if every void were filled.
  • Leaving out waste; broken and cut units are normal.
  • Subtracting openings but forgetting lintels and the bricks they need above.

Questions

How many bricks per square metre?

For German NF bricks in a 115 mm wall with 10 mm head and 12 mm bed joints, 48.2. For DF bricks (52 mm high), 62.5. A wall two bricks thick needs twice as many.

How many bricks per square foot?

Modular brick with ⅜ in joints: 6.86 per sq ft by the joint geometry, or 6.75 on modular coursing (3 courses = 8 in), which is the BIA table figure.

How much mortar for 100 bricks?

For modular brick with ⅜ in joints, BIA gives 8.1 cu ft per 1000 brick, about 0.8 cu ft per 100, before 15–25 % waste.

How much waste should I add?

The Brick Industry Association recommends at least 5 % on brick and 15–25 % on mortar.

Guides on this topic

Sources

  1. [1]Technical Notes on Brick Construction 10: Dimensioning and Estimating Brick Masonry (February 2009). Brick Industry Association. Modular brick 3⅝ × 2¼ × 7⅝ in with ⅜ in joints: 675 brick and 5.5 cu ft mortar per 100 sq ft, without waste. Add at least 5 % to brick and 15–25 % to mortar.. Checked November 5, 2026
  2. [2]Glossar: NF Normalformat; Lagerfuge. Baunetz Wissen. NF brick 240 × 115 × 71 mm; bed joint with normal mortar usually 12 mm, thin-bed mortar 1–3 mm; course height = brick height + bed joint.. Checked November 5, 2026
  3. [3]Masonry formats. Baukobox. NF 240 × 115 × 71 mm, DF 240 × 115 × 52 mm; octametric rule length = 2 × width + one joint, so the head joint is 240 − 2 × 115 = 10 mm.. Checked November 5, 2026

Formulas and sources last checked on November 5, 2026. How we calculate